Textured PC Film Sheet- Polished/Matte DFPC12
DFPC12 is a one side matte, one side polished textured polycarbonate film. It offers high temperature resistance, excellent dimensional stability, as well as good printability without pre- treatment making it an excellent candidate for multi-layer printing for applications such as overlays, floor graphics, high-performance labels and in-mould decoration.
DFPC12 is a one side matte, one side polished textured polycarbonate film.
It offers good printing performance, low water absorption,high temperature resistance, excellent dimensional stability, it very suitable for multi-layer printing for overlays graphics, labels,signs and in-mold decoration etc.
It can be screen printed using traditional solvent based or water based inks, as well as UV or infrared drying inks and offers ease of processing for thermoforming, embossing, die-cutting, hydro-forming and bending. The velvet texture offers mar resistance, and can be used over light-emitting devices (LEDs).
Code | Color | Texture | Thickness | Width |
DFPC12 | Natural | Polished/Matte | 0.25~1.5mm | 915mm&1220mm |
Gauage Variation: d<0.5mm ±10um 0.5≤d<1.2mm ±15um d≥1.2mm ±25um |
Product Categories
One side polished, one side matte transparent polycarbonate films and sheets.
Product Features
-Matte finish one side, Polish finish second side colored polycarbonate film
-Excellent dimensional stability
-Good printability without pre- treatment
-Low gloss
-High temperature resistance
Applications
-Overlays
-Floor graphics
-High-performance labels
-In-mould decoration
Widely used in lamps, car dashboards, buttons, LED displays, travel bags, advertising decoration, electronic displays, etc.
Specification
Code | Color | Texture | Thickness(mm) | Width(mm) |
DFPC24 | Natural | matte / velvet | 0.050 ~ 1.00 ( 0.002” ~ 0.040” ) | 915 & 1220 ( 3’ & 4’ ) Slitting available |
DFPC23 | matte / fine velvet | |||
DFPC25 | matte / suede | |||
DFPC12 | Polished / Matte | |||
DFPC14 | Polished / Velvet | 0.250~1.500 ( 0.010” ~ 0.060”) | ||
Thickness Tolerances | d<0.5mm ±10um 0.5≤d<1.2mm ±15um d≥1.2mm ±25um |
Typical Property Values
Property | Test Methods | Units | Value |
PHYSICAL | |||
Specific Gravity | ASTM D792 | g/cm³ | 1.2 |
Water Absorption Equilibrium, 24 HRS | ASTM D570 | % | 0.35 |
MECHANICAL | |||
Tensile Strength | ASTM D882 | Mpa | ≥55 |
Elongation Ultimate | ASTM D882 | % | ≥90 |
THERMAL | |||
Vicat Softening Temperature | ASTM D1525 | ℃ | 135 |
Thermal Shrinkage @135℃ | ASTM D1204 | % | ≤1 |
ELECTRICAL | |||
Dielectric Strength @10mils | ASTM D149 | KV/mm | ≥30 |
Volume Resistivity @25℃, 50%RH | ASTM D257 | Ω·cm | >1x1017 |
Surface Resistivity @25℃, 50%RH | ASTM D257 | Ω | >1x1015 |
FLAMMABILITY | |||
UL Flamability @≧20mils | UL 94 | -- | V-2 |